-4%
  • Guaranteed Fitment

    Always The Correct Parts

  • In-House Experts

    We Know Our Products

  • Added Value

    The Best For The Best

  • Aus Wide Delivery

    Fast Reliable Tracked Shipping

2 Inch 50mm Formula 4x4 Premium Lift Kit to suit Suzuki Jimny 3 Door 2018-on - FULCRUM

FULCRUM
In stock
$2,250.00 $2,150.00
Size Guide
$2,150.00

customers are viewing this product
2 Inch 50mm Formula 4x4 Premium Lift Kit to suit Suzuki Jimny 3 Door 2018-on - FULCRUM

2 Inch 50mm Formula 4x4 Premium Lift Kit to suit Suzuki Jimny 3 Door 2018-on - FULCRUM

 

The most comfortable lift kit, both off & on road. Perfect for touring, tough tracks and the beach. Proven in harsh Australian conditions.

2 Inch 50mm Formula 4x4 Premium Lift Kit to suit Suzuki Jimny 3 Door 2018-on

Included in this kit are SuperPro Radius Arms, which increase caster and setback to provide a better alignment than the factory hardware. They also enhance steering feel and control, reduce wandering at highway speeds, something unachievable with only caster correction bushes fitted.

After you have purchased this lift kit, someone from our team of suspension experts will call you to confirm your order details, your requirements, and your vehicle specifications. All to ensure that we give you the right product. If you purchase this lift kit using our click & fit service, we will confirm your installation date at the same time.

High Level Product Details

Formula 4x4 Enhancement Lift Kit designed to lift the vehicle 50mm and provide the ultimate in handling and control, both on and off road. Where applicable the spring rates of this lift kit can be adjusted to handle different front and rear loads. If you would like to change the specified spring rates of this lift kit, please give us a call, send us a message or leave a comment when you purchase this 4x4 lift kit.
 

  • extended brake lines and diff breather lines to allow full droop with maximum safety
  • DOT3 brake fluid for the ease of installation
  • replacement cross member to allow droop of drive shaft and strengthen chassis
  • special tuned shock absorber and spring combination to ensure ride handling and stop coil dislocation
  • Front Radius Arm Kit included to ensure correct caster settings and front diff angle correction
  • Low Pressure Nitrogen for fade free performance
  • Designed and built for Australian conditions
  • Tested, fitted and supported by 4WD Action
  • SuperPro Hybrid bushings on all Front Struts 
  • Specifically designed for each application
  • Valve coding to suit differing spring rates
  • Comfortable yet heavy duty 4WD Lift Kit
  • Big Bore design for improved heat dissipation
  • Tapered pegs on Front Struts for increased strength
  • Unlimited Kilometer warranty. Just activate your warranty online. Learn more here 


Formula 4x4 Lift Kit Warranty

Formula 4x4 lift kits come with a 5 year / Unlimited Kilometer warranty. Just activate your warranty online. Learn more here.

 

Premium Lift Kit Packaging & Shipping

When purchased, this lift kit will be delivered via Fulcrum’s ‘Premium Packaging’ service. This is an all-inclusive service, designed to ensure extremely fast delivery of your order. Your suspension components will be packaged securely to guarantee they are protected during transit. We provide our Premium Packaging service for all our shipping methods. Including Deliver to Door (Home Delivery), Click & Fit and Free Pickup (Click & Collect). You can find out more about our premium lift kit packaging by visiting this page. If you have any questions, you can call us on 1800 289 050.

 

Lift Kit Fitting Instructions

All lift kits are shipped with a set of lift kit fitting instructions and also include details on upgrading your warranty. The instructions provided are general in nature. It is highly recommended that you get your lift kit installed by a mechanic or suspension technician, preferably with wheel alignment facilities.

 


This Lift Kit and its Height Variations

Suppliers are often not open about this topic from the initial purchase. However, at Fulcrum Suspensions we believe in honesty and providing customers with all the information relevant to their purchase. The below is not exclusive to Fulcrum Suspensions, every brand of lift kit and every company that sells lift kits understands the below and works through it.

In the title of this lift kit a specific height increase is referenced. Although this is accurate, due to the complicated nature of suspension and numerous varying factors between each vehicle, such as accessories, factory ride height, sag due to age, use and pre-existing conditions. There will always be a tolerance for the final lift height increase that your 4WD receives both front and rear may vary to the one listed in the products title.

If we are provided with all the correct constant load details and we supply the correct springs. Your 4WD will get the correct lift height, within tolerance of as advertised. However due to external factors the tolerance my vary as much as + or – 15mm.

External factors that affect lift heights
  • On top of our engineering, we have installed this lift kit on thousands of 4WD’s across Australia and each with various setups. This has given us the data to determine the average lift height increases. The height increase referenced in the title of this lift kit is based on that average number.
  • If the vehicle has sagged already due overloaded springs caused by age, use and accessory installation. Then lift height change will likely be greater than the one listed in the products title. However, even with pre-existing sag the lift will take the vehicle back to OE ride heights + the increased lift mentioned.
  • Every vehicle that comes off the factory floor has a tolerance variation in factory ride heights. Therefore, the final before and after measurements, both front and rear will always be different from vehicle to vehicle. Which means that even though this lift kit specifies a specific lift height in the title, due to the varying standard ride heights of each vehicle the lift you may receive will vary.
  • If you do not provide our team with the correct info then we will not be able to supply you with the corrects springs, which will affect the lift height increase. Be sure that when our team reaches out to confirm all details you give them all info required.

 

Springs & Lift Heights

Regarding the below, when you are order a lift kit from Fulcrum Suspensions. Our suspension experts will call you to confirm all details and requirements before processing your order. We do this to make sure you get the best service and the best lift kit for your 4WD. Don’t stress about the finer details as we will take care of it. However, we note the below so you can understand the complexity.

As springs are what lift your 4WD, to ensure you get the correct height increase (lift) it is paramount that we supply the correct springs for your 4WD’s constant loads and intended use.

Although all lift kits specify a specific lift height in the title. As your 4WD has front and rear springs this means you will have a front lift height and a rear lift height. The spring rates we supply in this lift kit are determined by the weights you carry, a suspension height increase.

Keep in mind that both the front & rear springs work in conjunction with one another. If spring rate for either the front or rear is wrong, this could cause an uneven lift. Making the vehicle nose down or nose up which is not the outcome we want. So after purchasing when talking to our suspension experts, be certain to provide our team with as much info as possible in regards to the vehicles use and also constant loads.

To get the correct springs for your car, you must match your vehicles constant load/weight to the correct spring rates. For example, if you carry 250kgs you should get a spring that best matches that load.

We recommend you get all your constant load accessories sorted before you get a lift kit installed, this will ensure you have a level lift and the best ride from the get-go and wont require future spring changes. A ‘constant load’ is the accessories/gear that will be installed or in the vehicle 24/7.

You do not want to get a spring that is rated less than the load you carry at constant. If you do this, you will overload your spring and it will sag/fail. You can overload a spring by carrying too heavy of a load (front/rear) or by towing a boat caravan that adds extra weight to the tow ball. For example, if you have a 300kg rated rear spring but load your rear to 500kg, then your rear spring would fail and sag. The same applies to the front, with various engines and accessories having different weights such as alloy bull bar, steel bull bar, bumper bars, steel winch, synthetic winch, bash plates, tow hook, batteries, diesel engine, petrol engines, etc.

The flipside to the above, is that you do not want to get a spring that is rated too high for what you carry at constant. For example, you do not want to get a spring that is rated to 300kg if you only carry 100kg constantly. If you do this you will have a very stiff ride and it could lead to suspension failure such as shock top outs, coil spring trap issues and more.

If you are carrying any dynamic load, including extra load on the weekends, or tow anything. Then you will need an airbag kit to help. Airbag kits are designed specially not to carry weight but to help support your springs to handle any extra weight you may carry occasionally, like a boat, caravan, camper, trailer, or general load increase.

Again, please don’t stress too much about the above. As, after you order this lift kit, our suspension experts will call you to make sure you get the right kit, by confirming all your vehicle details and requirements.

If you have any questions, before you make a purchase. Please use our online chat or call us.

SKU JIMNY-004
Foot Note 1 Please note matching spring rates with your vehicles weight is critical to performance. If you are unsure of your vehicles rear load or the spring rate you should get. Then please send us a message or call us to make sure you get the right spring rate.
Foot Note 2 Kit contains: 4 x Formula Shocks, 4 x King Spring Coils, 1 x SuperPro Radius Arm Kit, 1 x SuperPro Cross Brace Kit, 1 x Extended Brake Line Kit (incl. DOT3), 1 x Differential Breather Line Kit, 1 x Extended Shock Bolt Kit
Foot Note 3 Kit content: 50033 x 2, 50034 x 2, KSFR-500 x 1, KSRR-501 x 1, TRC1160 x 1, SPF5528K x 1, TRC5529 x 1, SPF5530K x 1, TRC9001 x 1, TRC9008 x 1
Components Per 1 Kit
Sub brand Fulcrum 4x4
Product Note This kits default rear spring, has been specifically designed for heavy-duty use on vehicles that have a constant 0-100kg load.
EAN JIMNY-004
Read More
Read Less
SHIPPING INFORMATION IMPORTANT: There may be delays on certain orders due to the COVID-19 Pandemic. This may include incoming stock transfers and courier delivery times. KS RACING AUSTRALIA is an Australia company based in Sydney Australia and are only selling/shipping our products Australia Wide. For further details and confirmation, contact us directly on (02) 9905-9523 or email us at info@ksport.com.au SHIPPING CARRIERS We use a range of couriers and postal services depending on your location, product type and postage cost. These include freight companies such as Australia Post, Toll IPEC, Direct Freight Express, Startrack, Couriers Please and Fastway Couriers. Please only enter valid and complete street addresses failure to do so may result in delays in delivery or packages going missing. KS RACING AUSTRALIA will not accept any liability for lost freight if an invalid street address is used. SHIPPING FEES & CHARGES At KS RACING AUSTRALIA we are always trying to bring you the best deals as well as cost efficient postage fees. Subject to change depending on seasonal promotions and location of delivery. *Heavy and bulky items being shipped to remote location may incur additional shipping fee an example of such items are exhaust systems, air suspension systems, custom coilover kits. Shipping charges can be calculated in the shopping cart and checkout or for further details, email us at info@ksracing.com.au for further details. DELIVERY Deliveries made by courier (heavy and bulky items) cannot be delivered to an unattended address or PO Box. The courier will require a signature from an occupant at the specified delivery address at the time of delivery, if no one is available to sign for the goods or an authority to leave (ATL) is not given a card will be left and the parcel re-directed to the nearest courier depot. You will then be responsible for collecting the parcel from that depot you may incur an additional charge for re-delivery by the courier company. KS RACING AUSTRALIA recommends all deliveries be shipped to a location that is attended during business hours, whether that is a home, work or other address, to minimise any redelivery delays and/or additional fees. Please check that all parts received match the invoice. If you have been incorrectly supplied any items, please contact info@ksracing.com.au and we will rectify the issue for you immediately. PICK-UP In store pickup subject to warehouse availability and staffing. If allowed, pick-up can be scheduled and collected from our main Sydney Store, KS RACING AUSTRALIA; 39 Winbourne Rd, Brookvale, NSW, 2100. Pick up is available Monday to Friday 9am to 4pm. DAMAGED DELIVERIES If an item has been damage in transit, photographs or videos of the item/s and all packaging must be sent to info@ksracing.com.au with 48 hours of the delivery date. DISPATCH & HANDLING TIMES Majority of items at KS RACING AUSTRALIA are advertised to dispatch within 1 - 3 business days of the order being placed. Whilst 99% of orders are dispatched within this time period, on occasion this may not be the case due to factors beyond our control or may be a custom kit that require additional work hours. If you require a part urgently please contact our friendly staff and we will be able to provide you with a more precise dispatch & shipping time. ORDER TRACKING Once your order is dispatched KS RACING AUSTRALIA, we will issue you an email with tracking details you can also find this information by logging into your account. STOCK AVAILABILITY Dispatch and delivery time is subject to availability of stock. If a product is ordered and we are not able to dispatch the product within 5 business days a full refund or alternate product will be offered. ENQUIRE FOR AVAILABILITY Some products are listed as "Enquire for Availability" as we cannot guarantee a specific dispatch time however the items are available. Products with this status usually ship within a few weeks. We strongly encourage customers to double check with out customer service team if you intend to order an “Enquire for Availability” item so we can give you a better indication on delivery times. WILL MY PARTS BE SHIPPED TOGETHER? Majority of orders will be combined into one shipment, if for any reason should the order be split into more than one shipment tracking numbers will be provided. AUTHORITY TO LEAVE (ATL) By providing authority to leave or if you selected this option over the telephone with our Customer Service Centre, the courier will leave your parcel at your unattended premises in accordance with your instructions. You agree that the parcel is deemed received when left at your premises. KS RACING TEAM and contractors associated with the delivery, do not accept responsibility for any loss or damage which results from this Authority to Leave delivery method. You agree to release KS RACING TEAM from and against any and all claims, demands, liabilities, losses, costs and expenses, including financial and other consequential losses, made, suffered or incurred by you or any other person or entity as a result of this Authority to Leave. Please be aware the delivery estimates below may be delayed due to COVID-19 impact on Australia's freight network. NEW SOUTH WALES Regular Items after processing: Major Cities - 1 to 3 days Rural Areas - 2 to 5 days Remote Areas - 2 to 6 days QUEENSLAND / VICTORIA Regular Items after processing: Major Cities - 1 to 3 days Rural Areas - 2 to 5 days Remote Areas - 3 to 6 days WESTERN AUSTRALIA Regular Items after processing: Major Cities - 3 to 5 days Rural Areas - 4 to 7 days Remote Areas - 5 to 10 days SOUTH AUSTRALIA Regular Items after processing: Major Cities - 2 to 3 days Rural Areas - 3 to 4 days Remote Areas - 3 to 7 days NORTHERN TERRITORY Regular Items after processing: Major Cities - 3 to 9 days Remote Areas - 3 to 9 days TASMANIA Regular Items after processing: Major Cities - 3 to 5 days Rural Areas - 3 to 6 days Remote Areas - 4 to 9 days ACT Regular Items after processing: Major Cities - 1 to 3 days
RETURNS & REFUND POLICY Please choose our items carefully before making your selection and proceeding with your online purchase order as we do not refund for change of mind purchases. We are only able to accept a product for a refund, replacement or credit where there has been a major failure, such as: When the product has been assessed and found faulty. The product has been wrongly described. Or the product does not meet the “fitness of purpose”. All return requests must be submitted within 30 days of delivery. Refunds will be processed within 5-7 business days upon receiving and undergone inspection. An order cancellation fee of 20% may apply for change of mind cancellations to cover transaction and administration costs. Once an order is shipped, KS RACING AUSTRALIA may offer a refund at its own discretion, however all discretionary refunds carry a 20% restocking fee and all postage fees must be paid by the customer. WARRANTY For all warranty claims, the consumer must first contact KS RACING AUSTRALIA and lodge a Warranty Claims Case. In order to proceed with a warranty claim, you must provide the Support Team with: Your invoice (including order number) and any other proof of purchase. Details of the defect or damage in relation to which you are making a claim under the warranty. Photographic or video graphic evidence of the defect or damage, where applicable. Any other details we may need to process your claim. Where goods are damaged or defective upon delivery, you must provide photographic evidence of the damage before receiving a repair, replacement or refund. We reserve the right to determine which repair centre is the appropriate service location in each case. You must comply with all return instructions provided to you via your registered email address when making a claim under this warranty We cannot accept returns that have not been authorised through the process outlined in these terms and conditions. If any returned goods are found to be in good working order, we may seek reimbursement, at our discretion, for any costs incurred by us in relation to such goods. In such cases, you agree that we may hold your goods until such payment is received. Except as required by law (including the Australian Consumer Law), this warranty shall not apply in respect of goods: Where the goods have not been installed, maintained, operated or used in accordance with the manufacturer’s instructions or any other specifications provided with the goods; Where damage or defects are caused by deliberate or negligent misuse or abuse, physical alteration, fire, liquid spillage, use of incorrect voltage, power surges or dips, thunderstorm activity, force majeure, voltage supply problems, tampering or unauthorised repairs by any persons, use of defective or incompatible accessories, computer viruses, corrosive conditions or instruction by an insect, pest or other foreign body; Where damage results from any third party software or hardware not provided by us; Where items are lost or stolen; and In relation to repairs of batteries, where the batteries have not been used in accordance with specifications or they expire by normal use. Except as required by law (including the Australian Consumer Law), our liability under this warranty shall not exceed the amount of the purchase price of the goods or the replacement of the goods with the same or a similar product. In the event that storage media ordered from us becomes faulty, fails or otherwise detrimentally affects software or data stored on it, except as required by law (including the Australian Consumer Law), we will not be liable for any loss or damage to the software or data, however arising. You should maintain a backup of all software and data stored on your devices. If you return media (such as a hard disc drive), whether separately or as a part of a larger electronic or computing product, to us for any reason, including for replacement or repair, we will not be responsible for any software or data stored on the media. We make no representation that we will be able to repair or replace any product without risk to or loss of the software or data. If you are entitled to make a claim under this warranty, our staff will provide you with instructions as to how the goods may be returned to us at our expense (either you will be reimbursed for standard postage or, for larger items, we will organise a courier to retrieve the items). Unless otherwise provided by law, you will bear any other costs incurred in making a claim under this warranty.

Customer Reviews

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×
×