HOLDEN COMMODORE VE-VF COILOVER SET UP - RECOMMENDED GUIDE
Front Set-Up
- Make sure there's one washer on top of the pillow ball upper mount and another one underneath it.
- FRONT SPRING PRELOAD 10mm.
- Before setting
- After setting the spring pre-load, the compressed spring length should be around 170mm.
- Set the driver side camber bracket to the 1 o'clock direction and set the passenger side camber bracket to 11 o'clock direction before installing them into the vehicle.
- RIDE HEIGHT ADJUSTMENT IS MADE THROUGH ADJUSTMENT IN THE LOWER FOOT
- Front Dampening & Rebound Settings we suggest all the way hard (clockwise) and backwards 8 clicks. (Clockwise = Hard, Anti-Clockwise = Soft.) Adjust around to suit your personal driving style.
Rear Set-Up
- Length of the spring when unloaded is around185mm.
-
Set rear spring preload of 10mm so when the spring is compressed the length should be 175mm.
- Rear Dampening & Rebound Settings we suggest all the way hard (clockwise) and backwards 4 clicks. (Clockwise = Hard, Anti-Clockwise = Soft.) Adjust around to suit your personal driving style.